Short:    Monitorfile for MicroVitec1438
Author:   marcus.bayer@t-online.de (Marcus Bayer)
Uploader: marcus.bayer@t-online.de (Marcus Bayer)
Type:     gfx/board

This monitorfile supports the following modes on a MicroVitec 1438 Monitor with
a CyberVision64 card and CyberGfx V2.18 :

    Resolution    Frequency
   x    y   d    h(kHz) v(Hz)
  320  256   8   40.9   68.8
  640  256   8   44.6   74.0
  640  512   8   42.9   75.6
  800  600   8   43.7   67.7
 1024  768   8   44.9   55.2
 1120  953   8   44.9   90.1 i
 1280  953   8   45.0   90.1 i
  320  256  16   40.9   68.8
  640  256  16   42.1   69.9
  640  512  16   39.7   70.0
  800  600  16   44.6   69.2
 1024  768  16   44.9   55.2
  320  256  24   40.1   68.8
  640  256  24   42.1   69.9
  640  512  24   39.7   70.0
  800  600  24   44.6   69.2
 1024  768  24   38.7   98.5 i
 1120  730  24   35.2   91.9 i

I tried to find resolutions which :
- are very common (on Amiga and PC)
- are as large as possible on my screen
- flicker as less (or as fast) as possible
- have no bright or dark edges

!!!  CAUTION  !!!

This is what I consider a serious hack, because I had no information about the
frequencies a 1438 can take before blowing up. It seems to work fine on my
system, but I won't guarantee that it will work on YOURS !

For comparison, I use :
A 4000, CyberStorm 060/50 Mk I, CyberVision64, CyberGfx V2.18 (via updates)

You have to copy this monitorfile to envarc:cybergraphics/cybervision and
activate it via CVMode (Project/Open).

DISCLAIMER : I WILL ASSUME NO RESPONSIBILLITY FOR ANY DAMAGE ON MONITORS,
GRAPHICCARDS OR OTHER HARD- OR SOFTWARE. USE AT YOUR OWN RISK !

If you find this file useful please send me an (e-)mail (I can't force you). My
address is :

Marcus Bayer
Bromberger Str. 33
26388 Wilhelmshaven
Germany

or 

marcus.bayer@t-online.de
